Mounting The Controller - Danfoss ECL Comfort 100M User's Manual And Installation Instructions

Mounting the controller

You should mount the ECL Comfort controller for easy
access near the heating unit. You can choose between three
methods:
• Mounting in a panel
• Mounting on a wall
• Mounting on a DIN rail
Screws and rawlplugs are not supplied with this pack age.
Mounting in a panel
Order mounting kit No. 087B1148.
The panel plate thickness must not exceed 3 mm. Prepare
a cutout measuring 92 x 138 mm. Establish the electrical
con nec tions. Insert the controller into the panel cutout and
fi x it with the two locks which are placed diagonally in the
two corners of the controller.
22
Mounting the controller
You should mount the ECL Comfort controller for easy
access near the heating unit. You can choose between three
methods:
• Mounting in a panel
• Mounting on a wall
• Mounting on a DIN rail
Screws and rawlplugs are not supplied with this pack age.
Mounting in a panel
Order mounting kit No. 087B1148.
The panel plate thickness must not exceed 3 mm. Prepare
a cutout measuring 92 x 138 mm. Establish the electrical
con nec tions. Insert the controller into the panel cutout and
fi x it with the two locks which are placed diagonally in the
two corners of the controller.
22
Mounting on a wall
Order mounting kit No. 087B1154.
Mount the terminal box on a wall with a smooth surface.
Establish the electrical connections and position the
controller in the box. Secure the controller by the fi xing screw.
Mounting on a DIN rail
Order mounting kit No. 087B1145.
A mounting kit is necessary to mount the box with the
controller on a DIN rail.
Mounting on a wall
Order mounting kit No. 087B1154.
Mount the terminal box on a wall with a smooth surface.
Establish the electrical connections and position the
controller in the box. Secure the controller by the fi xing screw.
Mounting on a DIN rail
Order mounting kit No. 087B1145.
A mounting kit is necessary to mount the box with the
controller on a DIN rail.
23
23