Rear Bulbs - SMART fortwo coupe Owner's Manual

Turn signals
X
To remove: turn bulb holder : one quar-
ter turn anti-clockwise and pull it out.
X
Applying slight pressure, unscrew the
bulb anti-clockwise.
X
Remove the bulb from the bulb holder.
X
To fit: place the new bulb in the bulb
holder and screw it in clockwise.
X
Align the arrow marking on bulb
holder : with the line on the cover.
X
Turn bulb holder : a quarter turn clock-
wise.
Side turn signal lamps
i
Always have the bulbs for the side turn
signal lamps replaced at a specialist
workshop that is qualified for smart
electric drive vehicles, e.g. a smart
Centre.
X
To remove: open the door slightly on the
corresponding side.
X
Press latch : in the direction of the
arrow until the side turn signal lamp
housing is released.
X
Close the door.
X
Detach the turn signal lamp from the out-
side of the vehicle with a suitable tool.
X
Remove the bulb from the bulb holder.
19 fortwo cabrio only.
X
To fit: place the new bulb in the bulb
holder and screw it in clockwise.
X
Place the housing of the side turn signal
lamp into the wing and press firmly.
The housing engages.
Replacing the rear bulbs
X
Switch off the lights.
X
Switch the ignition off.
Tail lamps
X
To remove: open the lower tailgate.
X
Fold the rear soft top
up.
X
Remove the lateral cover from the corre-
sponding side of the boot.
X
Fold the insulation forwards if neces-
sary.
Example: left side
Retaining lug
:
Plug
;
X
Press retaining lug : in the centre of
the bulb holder upwards.
X
Pull the bulb holder out of the compart-
ment.
Replacing bulbs
19
/upper tailgate
Z
155