SMART fortwo coupe Owner's Manual page 158

Replacing bulbs
156
Left-hand side bulb holder, right-hand side is a
mirror image
Brake lamp/tail lamp
:
Turn signals
;
Retaining lugs
=
Reversing light/rear foglamp
?
X
Applying slight pressure, unscrew the
bulb anti-clockwise.
X
Remove the bulb from the bulb holder.
X
To fit: place the new bulb in the bulb
holder and screw it in clockwise.
X
Slide the bulb holder into the openings
for the lamp and snap the retaining lugs
into place.
X
Replace the cover in the boot.
Third brake lamp
X
To remove: remove screws : using a
screwdriver.
X
Take out additional brake light ?.
X
Pull out plug ; from bulb base =.
X
Turn the bulb anti-clockwise and remove
it from its holder.
To fit, follow the same sequence in reverse.
Licence plate lighting
X
To remove: apply a suitable object to the
left of levering points : on the lamp
cluster.
X
Unclip the licence plate lamp cluster.
X
Pull out connector :.
X
Remove bulb ;.
X
Insert the new bulb.
X
To fit: attach connector :.
X
Attach the lamp cluster on the right and
press in firmly on the left.
The cluster must snap into place audibly.
Replacing the interior lighting
You will need a 12 V10 W bulb type.