Battery (Vehicle); High-Voltage Battery - SMART fortwo coupe Owner's Manual

Only use wheel bolts that have been
designed for the wheel and the vehicle.
Other bolts could work loose.
G
WARNING
Only use wheel bolts that have been
designed for the wheel and the vehicle.
Other bolts could work loose.
Do not tighten the wheel bolts completely
while the vehicle is still jacked up. The
vehicle could topple off the jack.
X
Clean the wheel and wheel hub contact
surfaces.
X
Place the wheel on the wheel hub and push
it on.
X
Tighten two wheel bolts until they are
finger-tight.
X
Vehicles with steel wheels and hub caps:
fit the hub cap so that it is held in place
by the wheel bolts.
X
Tighten the last wheel bolt until it is
finger-tight.
X
All other vehicles: screw in the last
wheel bolt and tighten it slightly.
X
Lower the vehicle until it is once again
standing firmly on the ground.
X
Remove the jack.
X
Tighten the wheel bolts with the wheel
bolt wrench (tightening torque: 110 Nm).
G
WARNING
Have the tightening torque checked imme-
diately after a wheel is changed. The wheels
* optional

Battery (vehicle)

could work loose if they are not tightened to
a torque of 110 Nm.
Wheel with hub cap*
X
Vehicles with steel wheels and hub caps*:
fit hub cap *: so that tyre valve ; is
not trapped.
X
Press the hub cap*: evenly onto the
wheel with both hands.
X
Check to make sure the hub cap*: is
seated safely on the wheel.
Battery (vehicle)
Notes on the vehicle's electrical sys-
tem
The vehicle's electrical system provides
power for the electric drive and all elec-
trical consumers or components of the
vehicle.
Power is supplied to the vehicle via two
batteries:
12-volt battery
R

high-voltage battery

R
Important safety notes (high-voltage
battery)
Always have work on the high-voltage bat-
tery carried out at a qualified specialist
workshop.
167
Z