Replacing The Bulbs; Replacing Front Bulbs - SMART forfour Owner's Manual

X
Pull yellow release = behind the trim up
and simultaneously press release but-
ton ? on the selector lever.
X
Shift the selector lever to N or P.

Replacing the bulbs

Useful information
G
WARNING
Bulbs, lamps and plug connectors can
become very hot during use. When replac-
ing a bulb, you could burn yourself on
these components. There is a risk of injury.
Allow these components to cool down
before replacing the bulb.
G
WARNING
The radiator fan may continue to move or
suddenly move again even after the engine
is switched off. There is a risk of injury.
If you have to carry out work in the front
compartment:
switch off the ignition
R
remove jewellery and watches
R
never touch the rotation area of the fan
R
keep items of clothing and hair, for
R
example, away from the fan
Observe the following rules when replacing
bulbs:
Only replace bulbs when the engine is
R
switched off.
Do not use bulbs that have been dropped or
R
show signs of visible damage, e.g.
scratches.
Replacing the bulbs
Do not touch the glass bulb with your bare
R
hands.
Only use bulbs in enclosed lamps designed
R
for that purpose.
Only fit spare bulbs of the same type and
R
with a specified voltage.
Do not allow bulbs to come into contact
R
with moisture.
Have LEDs changed at qualified specialist
R
workshops only.
Change only the bulbs described below your-
self in accordance with the specified bulb
types.

Replacing front bulbs

Changing dipped-beam and main-beam
headlamps
X
Switch off the lights.
X
Open the service cover.
X
Remove cover :.
X
Pull out the connector.
X
Press retainer ; inwards and to the left.
X
Pull the bulb out.
X
Insert the new bulb.
X
Lock retainer ;.
X
Insert the connector.
X
Replace and engage cap :.
175
Z