Replacing The Bulbs - SMART EQ forfour 2018 Owner's Manual

Replacing the bulbs

184
!
Do not use any sharp-edged objects to
prise out the cover from the centre con-
sole. Otherwise, the cover or the centre
console could be damaged.
X
Apply the parking brake.
X
Open the drawer on the front-passenger
side.
X
Prise out cover : on the centre console
from bottom edge ; using with a flat,
blunt object.
X
Pull cover : in the direction of the
arrow.
X
Pull yellow release = behind the trim up
and simultaneously press release but-
ton ? on the selector lever.
X
Shift the gear selector lever to position
i or j.
Replacing the bulbs
Please note
G
WARNING
Bulbs, lamps and plug connectors can
become very hot during use. When
replacing a bulb, you could burn yourself
on these components. There is a risk of
injury.
Allow these components to cool down
before replacing the bulb.
Observe the following rules when replacing
bulbs:
Only replace bulbs when the engine is
R
switched off.
Do not use bulbs that have been dropped
R
or show signs of visible damage, e.g.
scratches.
Do not touch the glass bulb with your
R
bare hands.
Only use bulbs in enclosed lamps
R
designed for that purpose.
Only fit spare bulbs of the same type and
R
with a specified voltage.
Do not allow bulbs to come into contact
R
with moisture.
Have LEDs changed at qualified specialist
R
workshops only.
Change only the bulbs described below
yourself in accordance with the specified
bulb types.
Replacing front bulbs
Changing dipped-beam and main-beam
headlamps
X
Switch off the lights.
X
Open the service cover.
X
Remove cover :.
X
Pull out the connector.
X
Press retainer ; inwards and to the left.