Mechanical Installation; Chapter Overview; Unpacking The Unit; Delivery Check - ABB DCS880 series Hardware Manual

20 ... 5200 a

Hide thumbs Also See for DCS880 series:

Table of Contents

Mechanical installation

This chapter describes the mechanical installation of the DCS880.

- Open the box,

- take out shock dampers,

- separate manual and accessories.

Attention:

Do not lift the drive by the cover!

Check that there are no signs of damage. Before attempting installation and

operation, check the information on the nameplate of the converter module to verify

that the unit is of the correct type. The label includes an IEC rating, cULus, C-tick

(N713) and CE markings, a type code and a serial number, which allow individual

identification of each unit. The remaining digits complete the serial number so that

there are no two units with the same serial number.

Mechanical installation

3ADW000462R0101 DCS880 Hardware Manual e a

Table of Contents

Dcs880-s series