Interface Board Sdcs-Pin-H01; General - ABB DCS880 series Hardware Manual

64

Interface board SDCS-PIN-H01

General

The SDCS-PIN-H01 is designed for DCS880 converter modules sizes H1 ... H5 (20 A ... 1190 A).
It has 4 different functions:
1. The power supply for all internal voltages of the whole drive and the connected options (H1 ... H5).
2. Control of armature bridge including high ohmic measurement of DC- and AC voltage and an
interface for the current transformer measuring the armature current (H1 ... H5).
3. Control of the OnBoard field exciter and field current measurement (H1 ... H4).
4. An automatic adaptation of the auxiliary voltage of either 230 V
The board is connected to ground at points (
The board is used for mains supply voltages from 100 V up to 525 V and 600 V.
The DCS880 provides an automatic adjustment for current and voltage measurement, burden resistor
settings and 2-Q or 4-Q operation by means of setting parameters in the firmware.
Layout SDCS-PIN-H01
BL_PINH01_001_b.ai
Layout SDCS-PIN-H01
Technical data
SDCS-PIN-H01
F100
Conducting point
3ADW000462R0101 DCS880 Hardware Manual e a
or 115 V
AC
) inside the module.
F101 F102
.
AC
XAUX
(X99)
Input
Aux.
supply