Interface And Hardware Component Configuration Guide For Cisco Ncs 5500 Series Routers, Ios Xr Release - Cisco NCS 5500 Series Configuration Manual

Configuring Ethernet OAM
Command or Action
Step 5
maximum-meps number
Example:
RP/0/RP0/CPU0:router(config-cfm-dmn-svc)#
maximum-meps 1000
Step 6
log {ais|continuity-check errors|continuity-check
mep changes|crosscheck errors|efd}
Example:
RP/0/RP0/CPU0:router(config-cfm-dmn-svc)#
log continuity-check errors
Step 7 end or commit
Example:
RP/0/RP0/CPU0:router(config-cfm-dmn-svc)#
commit
Interface and Hardware Component Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.1.x
Purpose
(Optional) Configures the maximum number (2 to 8190) of MEPs
across the network, which limits the number of peer MEPs recorded
in the database.
(Optional) Enables logging of certain types of events.
Saves configuration changes.
• When you use the end command, the system prompts you to
commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
• Entering yes saves configuration changes to the running
configuration file, exits the configuration session, and returns
the router to EXEC mode.
• Entering no exits the configuration session and returns the router
to EXEC mode without committing the configuration changes.
• Entering cancel leaves the router in the current configuration
session without exiting or committing the configuration changes.
• Use the commit command to save the configuration changes
to the running configuration file and remain within the
configuration session.
Configuring Ethernet CFM
57