Verifying The Ethernet Oam Configuration - Cisco NCS 5500 Series Configuration Manual

Configuring Ethernet Link OAM
Command or Action
Step 3
ethernet oam
Example:
RP/0/RP0/CPU0:router(config-if)# ethernet
oam
Step 4
interface-Ethernet-OAM-command
RP/0/RP0/CPU0:router(config-if-eoam)# action
capabilities-conflict error-disable-interface
Step 5
commit
Example:
RP/0/RP0/CPU0:router(config-if)# commit
Step 6
end
Example:
RP/0/RP0/CPU0:router(config-if)# end

Verifying the Ethernet OAM Configuration

Use the show ethernet oam configuration command to display the values for the Ethernet OAM configuration
for a particular interface, or for all interfaces. The following example shows the default values for Ethernet
OAM settings:
RP/0/RP0/CPU0:router#
Thu Aug
GigabitEthernet0/4/0/0:
Hello interval:
Link monitoring enabled:
Remote loopback enabled:
Mib retrieval enabled:
Uni-directional link-fault detection enabled:
Configured mode:
Connection timeout:
Symbol period window:
Symbol period low threshold:
Symbol period high threshold:
Frame window:
Frame low threshold:
Frame high threshold:
Frame period window:
Frame period low threshold:
Frame period high threshold:
Frame seconds window:
Frame seconds low threshold:
Frame seconds high threshold:
High threshold action:
Link fault action:
Interface and Hardware Component Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release
6.1.x
46
show ethernet oam configuration
5 22:07:06.870 DST
Purpose
Enables Ethernet OAM and enters interface Ethernet OAM
configuration mode.
Configures a setting for an Ethernet OAM configuration command
and overrides the setting for the profile configuration, where
interface-Ethernet-OAM-command is one of the supported
commands on the platform in interface Ethernet OAM
configuration mode.
Saves the configuration changes to the running configuration file
and remains within the configuration session.
Ends the configuration session and exits to the EXEC mode.
Active
Configuring Ethernet OAM
1s
Y
N
N
N
5
0
1
None
1000
1
None
1000
1
None
60000
1
None
None
Log