Interface And Hardware Component Configuration Guide For Cisco Ncs 5500 Series Routers, Ios Xr Release - Cisco NCS 5500 Series Configuration Manual

Configuring Link Bundling
SUMMARY STEPS
1. configure
2. l2vpn
3. pw-status
4. bridge group bridge-group-name
5. bridge-domain bridge-domain-name
6. interface type interface-path-id
7. vfi {vfi-name}
8. neighbor A.B.C.D pw-id pseudowire-id
9. pw-class {class-name}
10. end or commit
DETAILED STEPS
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters global configuration mode.
Step 2 l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Enters L2VPN configuration mode.
Step 3 pw-status
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# pw-status
(Optional) Enables pseudowire status.
All the pseudowires in the VFI are always active, independent of the attachment circuit redundancy state.
Step 4
bridge group bridge-group-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group csco
RP/0/RSP0/CPU0:router(config-l2vpn-bg)#
Creates a bridge group so that it can contain bridge domains and then assigns network interfaces to the bridge domain.
Step 5 bridge-domain bridge-domain-name
Interface and Hardware Component Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.1.x
Configuring VPLS in MC-LAG
117