Interface And Hardware Component Configuration Guide For Cisco Ncs 5500 Series Routers, Ios Xr Release - Cisco NCS 5500 Series Configuration Manual

Configuring Link Bundling
Example:
RP/0/RP0/CPU0:router(config)# interface HundredGigE 0/1/0/1
Enters interface configuration mode for the specified interface.
Enter the HundredGigE keyword to specify the interface type. Replace the interface-path-id argument with the node-id
in the rack/slot/module format.
Step 9 bundle id bundle-id [mode {active | on | passive}]
Example:
RP/0/RP0/CPU0:router(config-if)# bundle-id 3
Adds the link to the specified bundle.
To enable active or passive LACP on the bundle, include the optional mode active or mode passive keywords in the
command string.
To add the link to the bundle without LACP support, include the optional mode on keywords with the command string.
• If you do not specify the mode keyword, the default mode is on (LACP is not run over
Note
the port).
Step 10 bundle port-priority priority
Example:
RP/0/RP0/CPU0:router(config-if)# bundle port-priority 1
(Optional) If you set the bundle maximum-active links command to 1, you must also set the priority of the active link
to the highest priority (lowest value) and the standby link to the second-highest priority (next lowest value). For example,
you can set the priority of the active link to 1 and the standby link to 2.
Step 11 no shutdown
Example:
RP/0/RP0/CPU0:router(config-if)# no shutdown
(Optional) If a link is in the down state, bring it up. The no shutdown command returns the link to an up or down state
depending on the configuration and state of the link.
Step 12
exit
Example:
RP/0/RP0/CPU0:router(config-if)# exit
Exits interface configuration submode for the Ethernet interface.
Step 13 bundle id bundle-id
Example:
RP/0/RP0/CPU0:router(config)# interface TenGigE0/1/0/1
RP/0/RP0/CPU0:router(config-if)# bundle id 3
RP/0/RP0/CPU0:router(config-if)# bundle port-priority 2
mode active passive
[ { |
Interface and Hardware Component Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.1.x
on no shutdown exit
| }]
Configuring Ethernet Link Bundles
95