Snmp Setting - GeoVision GV-VS04H User Manual

4.7.7 SNMP Setting

The Simple Network Management Protocol (SNMP) allows you to monito
camera through SNMP network management software. Note this function
for GV-VS04H (Firmware Version 1.05 or later), GV-VS11 / 12 (Firmware Version 1.05 or
later) and GV-VS14 / 2420 / 2400 / 2401 / 2820 / 2800 / 21600.
1. Select Enable SNMPv1 SNMPv2c to enable the function.
2. To enable access to Read/Write Name, type a name s
password to allow read and write access to the camera from the S
3. To enable Read only Name, type a name string to allow read-only ac
camera from the SNMP software.
4. For a more secured connection,
5. To enable access to SNMPv3 Read/write Name, type a name string.
6. Select an Authentication Type to use for SNMP requests.
7. Type the Authentication Password and Current password (Encrypted). You will
need to type these passwords in the SNMP software to be able to access the camera.
8. To enable access to SNMPv3 Read only name, follow steps 5 to 7.
9. Click Apply to save the settings.
110
Figure 4-41
select Enable SNMPv3 to enable SNMP version 3.
r the status of the
is only available
tring. This will serve as a
NMP software.
cess to the