Configuring The Basics - GeoVision GV-VS04H User Manual

IMPORTANT:
•
PPPoE should only be enabled if you know which IP address the GV-Video Server will
get from the ISP. Otherwise, you must use the Dynamic DNS service to obtain a
domain name linked to the GV-Video Server's changing IP address first.
For details on Dynamic DNS Server settings, see 4.7.3 Advanced TCP/IP.
•
If PPPoE is enabled and you cannot access the unit, you may have to reset it to the
factory default settings and then perform the network settings again.
To restore the factory settings, see the Default button in 1.7.1 Front View.

2.4 Configuring the Basics

Once the GV-Video Server is properly installed, refer to the following sections in this manual
for some of the important features that can be configured using the browser-based
configuration page:
•
Date and time adjustment: see 4.8.1 Date and Time Settings.
•
Login and privileged passwords: see 4.8.4 User Account.
•
Network gateway: see 4.7 Network.
•
Camera image adjustment: see 3.2.2 The Control Panel of the Live View Window.
•
Video format, resolution and frame rate: see 4.1.2 Video Settings.
Getting Started
2
29