3.6 Setting Up On-Screen LED Panel
For GV-Tower NVR/VMS System V2, a LED panel on the screen provides a quick indication of
the activity status of hard disk drives.
LED Color
Gray
Green
Red
Flashing Green
Flashing Red
1. Click the Windows Start button, and select Hot Swap HDD Tool.
2. Click Tools on the menu bar, and select Setup LED Panel. This dialog box appears.
Figure 3-23
Description
- No HDD is assigned to this LED.
- The system is not started.
A HDD is assigned to this LED.
The HDD is full.
The system is recording.
The HDD is recycling.
Figure 3-24
Getting Started
3
21