Options - GeoVision GV-VS04H User Manual

1.6 Options

Optional devices can expand your GV-Video Server's capabilities and versatility. Contact
your dealer for more information.
GV-GPS Receiver
GV-Relay V2
GV-WiFi Adaptor V2
GV-PA191 PoE Adaptor
GV-VR605A DC Voltage
Regulator
10
GV-GPS Receiver is a Global Position System
receiver. With the GV-GPS Receiver, you can perform
GPS tracking and location verification of the GV-Video
Server. Two types of interfaces are available: UART
(for GV-VS04H / 14) and RS-232 (for GV-VS12).
Note: GV-GPS Receiver is only supported by
GV-VS04H / 12 / 14.
Working with a GV-Relay V2, the GV-Video Server is
capable of driving the loads of relay outputs over 5
volts.
Only supported by GV-VS2420 / 2400 (Firmware
Version 1.03 or later) / 2401 / 2820 / 2800 / 21600.
The WiFi Adaptor V2 is designed to connect GV IP
devices, such as GV-Video Server, to the wireless
network.
GV-PA191 is designed to provide power to the IP
device through a single Ethernet cable. GV-PA191 is
only supported by GV-VS04H / 12.
With a GV-VR605A, you can install the GV-Video
Server in the car. GV-VR605A will supply and maintain
a 12V voltage to the GV-Video Server and its
connected cameras.
Note: GV-VR605A is only supported by GV-VS04H /
11 / 12 / 14.