Ptz Settings - GeoVision GV-VS04H User Manual

4.2.1 PTZ Settings

You can connect up to 4 PTZ cameras to your GV-VS2420 / 2400
to 8 PTZ cameras to your GV-VS2820 / 2800, and up to 16 PTZ cameras
GV-VS2160 0 video server through RS-485 interface on the I/O terminal block. In addition,
you can also connect your GV-VS2420 / 2400 / 2401 / 2800 / 21600 directly through
coaxia l cables.
Note:
1. GV-VS2420 / 2400 / 2401 / 2820 / 2800 / 21600 supports the PTZ cameras with HD-
TVI / AHD stan
2. GV-VS2820 does no
To configure PTZ settings:
1. Select the Enable Option.
2. Select a model name or a protocol from the PTZ Name drop-down list according to
your camera models.

For the PTZ camera adopting HD-TVI / AHD standard, select H
Coaxial for coaxial cable transmiss

For the PTZ camera using
corresponds to your PTZ camera.
3. Only for RS- 485 connection, select a value corresponding to your PTZ camera from
the Baud Rate and PTZ Address drop-down lists.
4. Click Save to save the above settings.
[ Coaxial Settings]

Camera 1-16: The number of cameras the GV-Video Server can connect to vary from
model to model. Only for GV-VS2420 / 2400 / 2401 / 2800 / 21600 connected with
HD-TVI / AHD camera, select the type of PTZ camera from the Camera drop-down list
to enable coaxial cable transmission. For this specific model, DS-2AE5223TA-A of
Hikvision, select HIKVISION. For other models of Hikvision or other cameras,
Generic is selected by default.
68
dard or RS-485 connection.
t support coaxial cable connections with PTZ cameras.
RS-485 connection, select one of the others that
ion.
/ 2401 video server, up
to your
D-TVI / AHD