Setting Up Gv-Video Server On Gv-Vms - GeoVision GV-VS04H User Manual

7.2 Setting Up GV-Video Server on GV-VMS

To set up the cameras from the GV-Video Server on the GV-VMS, follow these steps:
Note: The following instructions are based on GV-VMS V14.10 software and user
interfaces.
1. To access the IP Device Setup page, click Home
Configure and select Camera Install.
2. Click Add Camera
146
Figure 7-8
. This dialog box appears.
Figure 7-9
, select Toolbar , click