Receiving Cardholder Data From Video Server - GeoVision GV-VS04H User Manual

7.3 Receiving Cardholder Data from Video Server

This function is only available for GV-VS04H / 14. Over the network, GV-DVR / NVR can
receive cardholder data from the Wiegand-interface card reader. This transmission is made
possible through GV-Video Server.
Wiegand In
Card Reader
Note: The function is not supported by GV-VMS.
To receive cardholder data from Video Server, follow these steps:
1. Add the GV-Video Server to the GV-DVR / NVR. See 7.1 Setting Up GV-Video Server.
2. Click the Configure button, point to Accessories and select GV Wiegand Capture
Device Setting. The GV-Wiegand Capture Setup dialog box appears.
3. Click the New button. This dialog box appears.
Figure 7-14
4. Select GV-Video Server from the Type drop-down list, enter a descriptive name for
the Video Server, select the IP address of the video server from the Address drop-
down list and select the camera to be mapped with.
TCP
GV-Video Server
Figure 7-13
DVR / NVR / VMS
7
/
IP
Video Data
Text Data
GV-DVR / NVR
149