Installing The Unit; Installing Optional Modules - Advanced Energy Thyro-PX User Manual

®
Advanced Energy
CAUTION:
The modules are heavy. Use two people to lift the module.
ATTENTION:
Les modules sont lourds. Le module doit être soulevé par deux personnes.
TO LIFT THE UNIT
• Lift the unit by holding on to the front of the unit while also supporting the rear
of the unit.

INSTALLING THE UNIT

Installing Optional Modules

DANGER:
RISK OF DEATH OR BODILY INJURY. Disconnect and lockout/tagout all
sources of input power before working on this unit or anything connected to
it.
DANGER:
RISQUE DE MORT OU DE BLESSURES CORPORELLES. Débrancher et
verrouiller/étiqueter toutes les sources de puissance d'entrée avant de
travailler sur cette unité ou sur tout élément qui y est raccordé.
The optional modules may be shipped separately.
1. Verify that the unit is disconnected from all power sources.
2. Unpack each optional module at an ESD safe work space.
3. Plug each optional module into the unit.
4. Secure each module with the two TORX
For additional module documentation, scan the QR code that corresponds to the
module (see the following table).
57010148-00B
®
T8 screws provided with the module.
Installation, Setup, and Operation
Thyro-PX® Power Controller
5‑15