Using Playlists; Working With The All Clips Playlist - AJA Ki PRO Installation And Operation Manual

Using Playlists

Working with the All
Clips Playlist
Ki Pro v3.2
4. Select control of clip naming in the Settings column for each system, either Slave
Name or Master Name. For details, see the previous discussion.
5. Select one master system in the Master column to control the gang.
6. For the master system, set the clip naming in the Settings column.
7. Use the master system to control record start and stop and clip naming.
Beginning with Ki Pro version 3.0 firmware, AJA provides tools for reviewing clips and
creating playlists of clips. These clip playlists can be managed on the web browser
Playlists screen, which includes a default All Clips playlist showing all clips on the Ki Pro
unit.
The default state of the Playlists is to list All Clips available. All Clips represents all of the
recordings made on the Ki Pro or valid files transferred to the Ki Pro.
Figure 41. Ki Pro Web Interface, All Clips Playlist
You can cue up a clip quickly for review by simply double-clicking the clip in the list.
Note that once you've double-clicked a clip to select it, it will be highlighted in blue in
the list and the first frame of video from that clip will appear on the output of the Ki Pro.
To play back the clip, simply open the Transport page of the web UI and begin playback
with the Play button. You can even quickly scan material by setting the Media>Play
Media>All selection so that as you highlight clips for review, they will continue playing
out of the Ki Pro outputs.
98 www.aja.com