Table of Contents
Advertisement
HOT WATER DELIVERY FOR INFUSIONS:
With the steam boiler ON and pressurised (approximately 1 - 1.2 bars, as shown on the main Display), position a frothing jug underneath the hot
water delivery spout 7 (PAGE 3).
Press the hot water delivery button 8 (PAGE 5). Hot water delivery will begin.
When the desired amount has been delivered, press button 8 again (PAGE 5) to stop delivery.
PLEASE NOTE: Do not press button 8 (PAGE 5) before placing a frothing jug below the hot water delivery spout 7 (PAGE 3), to avoid being burnt.
PLEASE NOTE: If the machine has been idle for more than an hour, draw off approx. 200 cc empty before delivering.
ACCESSING THE APPLIANCE PROGRAMMING/SETTINGS MENUS:
To access the appliance settings/parameters menu, proceed as follows:
With the appliance ON, press the
button on the Touch Display for more than a second and the following will appear on the Display:
Enter the 4-digit PIN to access the menus (DEFAULT PIN: 0000) and confirm by pressing the button
.
16
MUM S11BRIO REV01
Advertisement
Table of Contents
