Table of Contents
Advertisement
8
9
-
5.9 AT TIMED HOT WATER POURING TO PREPARE INFUSIONS - A.T. - (optional)
Hold down the free flow delivery button
starts to flash (the dose symbols will remain lit) and the symbols of all the other touchpads switch off.
The symbol on the timed water delivery button will start to flash.
Press the button for timed hot water delivery (3); the symbol will stop flashing and stay lit to indicate that programming is in progress.
When the dose has reached the required amount, press the button (3) again to stop.
Take note!
To quit the programming function, press the free flow delivery button for 5 seconds or, alternatively, wait 1 minute to quit the
function automatically.
5.10 MIXED HOT WATER FUNCTION FOR INFUSIONS – (optional)
To activate the function, proceed as follows:
1. Push the free-flow delivery button
button start to flashing (the automatic doses symbols remains ON) and all of the symbols of the other touchpads are turned off.
2. The symbol of the preset hot water delivery infusions button is on but not flashing (MIXED HOT WATER FUNCTIONS is OFF).
Pushing the button
(h) the symbol of the preset hot water delivery infusions button start to flashing (MIXED HOT WATER FUNC-
TIONS is ON).
Everytime the button
(h) is pusher, you can turn ON or OFF the MIXED HOT WATER function (MIX ON: the symbol of the preset hot
water delivery infusions button flashes; MIX OFF the symbol of the preset hot water delivery infusions is ON but set).
MIX OFF = water no mixed (symbol of the preset hot water delivery infusions is ON but set).
MIX ON = 50% hot water and 50% cold water (the symbol of the preset hot water delivery infusions button flashes).
28
(o) of the first touchpad on the right (1st GROUP) for about 5 seconds, until the symbol
(o) of the first touchpad on your right (1°GROUP) for about 5 seconds until the symbol of the
espresso coffee machines
LSI 089 - Rev. 00 - Ed. 04/2015
Hide quick links:
Advertisement
Table of Contents
