Drain System; Gas System Installation Diagram (Optional) - La Spaziale COMPACT Instruction Manual For The Installer

1.8

DRAIN SYSTEM

Fit the pressurised drain pipe into the appropriate pipe gland of the appliance drain box and insert the other
end directly into the drainage siphon prepared for system installation (4 - Pict 3 – page 8). Make sure that
there are no kinks and that the pipe has a sufficient slope to drain without any difficulty.
Do not fit the drain pipe into basins or buckets placed under the counter as this will increase the
possibility of forming dirt deposits and as a result, the spread of bacteria.
1.9

GAS SYSTEM INSTALLATION DIAGRAM (optional)

KEY
1
Gas tap (previously installed by the customer)
2
Gas supply pipe
NOTE. The appliance has been equipped by the

manufacturer to operate with LpG (G30). Only use
pipes that are suitable for the type of gas used
and compliant with the laws in force to connect
the appliance to the system.
If the coffee machine is operated using LPG, make
sure that the mains supply pressure is no more
than 30 mbar, as higher pressure could damage the
appliance.
NOZZLE Ø HOLE
GAS TYPE
Mod. 2 GR
Mod. 3 GR
Mod. 4 GR

NOTE. The nozzle hole (Ø) in given in hundredths of a millimetre.
These values refer to the heating phase of the machine, i.e. when the gas pressure switch is fully open

(with maximum flame).
Ø HOLE
G30 G20
57* 95*
75* 118*
75* 118*
INSTRUCTION MANUAL FOR THE INSTALLER
1
GAS TABLE
Rated Con- Rated
sumption Consumption
G30 G20
gr / h l / h
116 152
182 240
182 240
2
pOWER
pOWER
RATING
RATING
Watt Kcal / h
1600 1376
2500 2150
2500 2150
LSI 001 -EN- REV. 06
4
9