Thermo Scientific AI 1310 User Manual page 73

Thermo Scientific
Figure 44. Centering Plates
3. Check the correct alignment of the sampling system support, then fix it by tightening the
proper fixing screws.
4. Insert the sample tray into the sampling unit base.
• AI 1310 — Insert the 8-position sample tray into the appropriate housing of the
sampling unit base. See
Figure 45. 8-position Sample Tray
Centering Plate for
TRACE GC Ultra
Centering Plate for
TRACE 1300/1310
Figure 45.
AI 1310/AS 1310 Sampling System - User Guide
3
Installation of the AI 1310/AS 1310 on the GC
PTV
SSL
8-position Sample Tray
Installation
49