Vial Capture Device; Syringe - Thermo Scientific AI 1310 User Manual

Vial Capture Device

Syringe

Thermo Scientific
The vial capture device is the lower part of the injection device. See
The functions of this device are:
• to guide the syringe needle
• to acknowledge the vial presence
• to acknowledge the injector presence
Figure 10. Vial Capture Device
The standard syringe has 10 μL capacity with 50 mm needle length.
Note 5 and 0.5 μL syringes are optionally available.
A thorough washing of the syringe can be done thanks to the possibility of using up to four
solvents. See Washing and Waste
To install or replace the syringe, please see the
"Maintenance."
Figure 11 shows the syringe housing.
Tray.
Chapter 3, "Installation,"
AI 1310/AS 1310 Sampling System - User Guide
2
Sampling Unit
Injection Assembly
Figure 10.
and the Chapter 5,
15