Thermo Scientific AI 1310 User Manual page 52

3
Installation
Sampling System Support
28 AI 1310/AS 1310 Sampling System - User Guide
Support for the Installation on the Front/Back Injector Module
The same sampling unit support is used. The L-shape bottom plate must be oriented
accordingly before fixing it on the GC. See
Figure 22. Support Oriented for the Installation on the Front Injector Module
Figure 23. Support Oriented for the Installation on the Back Injector Module
Figure 22 and Figure 23.
Guide Pivot
Sliding Slot
Top Plate
Retainer
Support Pin
(Only for AS 1310)
L-shape Bottom Plate
(Oriented on Front)
Retainer
Guide Pivot
Retainer
Top Plate
Retainer
Support Pin
(Only for AS 1310)
Sliding Slot
L-shape Bottom Plate
(Oriented on Back)
Thermo Scientific