Thermo Scientific AI 1310 User Manual page 55

Thermo Scientific
Figure 27. Bracket for the Installation of the AI 1310/AS 1310 Support
1
2
3
CAUTION If you are installing the sampling system support for the installation of an
AS1310 equipped with the 155-position sample tray, make sure that the support pin is
screwed into the dedicated hole on the sampling system support. See the images below:
Support Pin
3
3
2
2
4
AI 1310/AS 1310 Sampling System - User Guide
Sampling System Support
1 = Support Bracket
2 = Holes on the TRACE GC Ultra Top Cover
3 = Fixing Screws
4 = Sampling Unit Support
3
Installation
31