Thermo Scientific AI 1310 User Manual page 71

Thermo Scientific
Figure 42. Two or More FOCUS Placed on the Same Workbench
1
1
1
A = Conventional Installation
B = Space Saving Installation
1 = Fixing Screws
2 = Sampling System Support
3 = AS 1310
4 = Second FOCUS GC
Proceed as follows:
1. Remove from the GC upper cover the two plastic caps covering the corresponding fixing
holes.
2. Insert into each slot present on the support the provided fixing screw.
3. Guide the two fixing screws into the corresponding fixing holes located on the GC upper
panel.
4. Loosely tighten the screws.
Installing the Sampling System Support on the FOCUS GC
A
2
B
3
2
AI 1310/AS 1310 Sampling System - User Guide
3
Installation
3
4
4
47