Thermo Scientific AI 1310 User Manual page 53

Thermo Scientific
Support for the Installation in Gemini Configuration
This configuration uses a dedicated double bottom plate and two top plates. See
Figure 24. Support for the Installation in Gemini Configuration
Support for the Installation When a TSQ Quantum Mass Spectrometer is Coupled
with the GC
This configuration uses a dedicated double bottom plate and two top plates. See
Figure 25. Support for the Installation when a TSQ Quantum is Coupled with the GC
Top Plate Back not for
155-position Sample Tray
CAUTION: The AS 1310 equipped with the
155-position sample tray can ONLY be mounted on
the front injector module. The back top plate is not
provided with the 155-position sample tray.
AI 1310/AS 1310 Sampling System - User Guide
3
Installation
Sampling System Support
Figure 24.
Guide Pivot
Sliding Slot
Support Pin
(Only for AS 1310)
Retainer
Top Plate
Retainer
Double Bottom Plate
Figure 25.
Guide Pivot
Support Pin
(Only for AS 1310)
Sliding Slot
Retainer
Top Plate
Retainer
Double Bottom Plate
29