Dmx512 Configuration; Dmx 512 Connection - ACME SAM-50 User Manual

6.3 DMX512 Configuration

6.4 DMX 512 Connection

The fixture is equipped with 3-pin XLR sockets for DMX input and output. The sockets are
wired in parallel. Only use a shielded twisted-pair cable designed for 3-pin XLR-plugs and
connectors in order to connect the controller with the fixture or one fixture with another.
If you are using the standard DMX controllers, you can connect the DMX output of the
controller directly with the DMX input of the first fixture in the DMX-chain. If you wish to
connect DMX-controllers with other XLR-outputs, you need to use adapter-cables.
At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a
120Ωresistor between Signal (－) and Signal (＋) into a 3-pin XLR-plug and plug it in the
DMX-output of the last fixture.
12- 13-