Safety Instruction; Technical Specification - ACME SAM-50 User Manual

1. Safety Instruction

WARNING:
Please read carefully the instruction which including important information about
the installation, usage and maintenance.
The following points are important for safety as well as for the installation and
performance.
Unpack carefully and be sure that no damage has occurred during transportation.
It is very important to ground the yellow/green conductor in order to meet regulations
for safety.
Do not connect the device to any dimmer pack.
The electrical work that is necessary for installation must be made by qualified
personnel.
Be sure to locate the unit in a place with adequate ventilation at least 15 cm from the
walls. Be sure that no ventilation slots are blocked.
Be careful that no liquids or other objects can enter the unit. If this ever happens,
disconnect the main power immediately.
When malfunction, turn off the power immediately. Never try to repair the unit
yourself that carried out by non-qualified personnel can lead to serious damage.
Please contact your dealer for technical assistance.
Always remember to unplug the unit before any repair service.
CAUTION!
The maximum load of the device is 50 kg !
Do not exceed this value.
2-

2. Technical Specification

Power supply
- AC 120V~60Hz (US)
- AC 230/240/250V ~ 50-60Hz (EU)
Circuit break
- T15A
DMX Connection
- Input: 3-pin XLR socket
- Output: 3-pin XLR socket
Movement
- Pan: 360° in 2.8 second.
- Automatic pan homing correction.
DMX Channels
- Standard DMX 512 signal addressing
- Control by any universal DMX controller available
- 5 Channels:
Channel 1 = Pan position
Channel 2 = Pan fine
Channel 3 = Macro
Channel 4 = Speed
Channel 5 = Reset
Macro
- 10 moving pattern for instant show
- Pan moving angle are selectable (continuum rotation , 30°, 45°, 60°, 90°, 120°, 180°,
270° & 360°)
Max. Load : 50 kg
Dimension : 522x480x193 mm
Weight : 16.8 kg
3-