How To Set The Unit; Control Panel; Main Function - ACME SAM-50 User Manual

5. How to Set the Unit

5.1 Control Panel

LCD MONITOR
To show the various menus
LED
DMX On
MASTER On
SLAVE On
POWER On
Button
ESC To go back to the previous function
ENTER To confirm the selected function
JOG WHEEL To select the given function
On/Off switch
Turns On/Off the power
Power cord
To connect the power plug
Circuit break
Protect the inner circuit from electrical damage.
DMX input/output
For DMX 512 operation, use 3-pin XLR plug cable to link the unit together.
DMX input
Master mode
Slave mode
Indicating advertising device in active
6-

5.2 Main Function

To select any functions, press MENU button until the required one is shown on the display.
Select the function by ENTER button and the display will blink. Use DOWN and UP button
to change the mode. Once the required mode has been selected, press ENTER button to
setup or it will automatically return to the main functions without any change after idling 8
seconds. Back to the functions without any change press MENU button. The main
functions are shown below:
7-