Mechanical Installation
November 2016
3.3.2
Shorten the extended cone antenna
This section only applies to the extended cone antenna (option code S1).
To determine the antenna length, follow the guidelines in section
page
13.
1.
2.
3.
4.
5.
20
PRELIMINARY
Mark where to cut the antenna.
Cut the antenna at the marking.
Remove any burrs.
Measure the Antenna Extension Length (L).
Update the transmitter configuration to the new Antenna Extension Length (L).
Rosemount Radar Master:
Under Configure, select Level Setup >
Antenna.
00809-0100-4408, Rev AA
"Nozzle requirements" on
L
AMS Device Manager and
Field Communicator:
From the Home screen, select
Configure > Manual Setup > Level
Setup > Antenna.
Reference Manual
Mechanical Installation