Controlling The Instrument Refresh - Keysight N7744A User Manual

1
Getting Started

Controlling the Instrument Refresh

42
Recalling a configuration
1 In the File menu, select Load.
2 Enter or select the setting you want to retrieve.
3 Click on the "OK" button.
1 In the File menu, select Update.
In the dialog, you can :
Figure 31 Controlling the Instrument Refresh
• Stop and start the display of all changes. Make sure to put a check
in the box for "Update enabled", to enable the N77xx Viewer to
display the status and results from the instrument. If there is no
check in the box for "Update enabled", the display is not updated
with the replies to queries sent to the instrument.
•
Set the update interval for "Readings" to control how often the
result is read from the instrument and the display updated.
•
Set the update interval for "Polled Values" to control how often
the measurement parameters are read from the instrument and
the display updated. This is useful if, for example, more than one
person can control the instrument.
2 When you have set all the values, click on the "OK" button.
Keysight N774x Series