1
Getting Started
36
Figure 25
If it is not already installed, you will need to install a Java run-time
engine to use this page.
Basic configuration and functionality are available from this web
page.
•
You can control any of the instruments from the Keysight
N77xx Viewer.
– Connecting and using the N77xx Viewer is described in
"Connecting to the Instrument - Overview" on page
More advanced functionality is available through programming with
SCPI commands (described in the Programming Guide available on the
CD supplied with the instrument or from www.keysight.com), or using
the 816x VXI Plug&Play driver, version 4.4.2 or higher. You can also use
the IVI-COM driver for the N7744A and N7745A Multiport power
meters.
30.
Keysight N774x Series