Keysight N7744A User Manual page 27

1
Getting Started
26
Site Network Connections
The following figure shows a typical LAN cable connection for a site
network.
Figure 12 Typical Site LAN Network Connections.
On site networks, the instrument and the computer are connected
directly to site LAN ports, or are connected to the site LAN through a
switch. In each site network configuration, standard LAN cables are
used.
The LAN LED
As the LAN connection is made, the DHCP server assigns an address
and the LXI device identification proceeds you will see the following
indicators:
Figure 13 The LAN LED
There may be a delay between making the LAN link (yellow status) and
getting the IP address (green status). This delay may be longer if there
Keysight N774x Series