Connecting Over Lan - Keysight N7744A User Manual

Connecting over LAN

N O T E
Keysight N774x Series
then click on [Send & Read].
The instrument returns its current IP address.
Figure 21 :SYSTem:COMMunicate:ETHernet:IPADdress:CURRent?
The screenshots show the Keysight N7745A Multiport Power Meter. The same
procedure applies when connecting to other N77xx instruments like attenuators,
switches and laser sources.
1 Make sure the instrument is connected to the LAN, and that the LAN
LED on the front panel is green. See,
more information to connecting over LAN.
2 If it is not already running, start the Keysight Connection Expert
software.
3 Select "LAN (TCPIP0)" in the list.
Getting Started
"LAN Interface" on page 23
1
for
33