Keysight N7744A User Manual page 46

2
Power Measurement
How to Change the Settings of the Optical Multiport Power Meter
To change the settings of the Optical Multiport Power Meter from the
Browser Web control window, you must select the "Allow Full Control"
button. Now you are able to change the settings (see the figure, below)
of the Optical Multiport Power Meter. The changes are made when you
press the "Apply" button. If you selected the "All" checkbox, the setting
is applied to all ports.
To quickly and reproducibly set the measurement parameters, use the
Measurement Settings buffers. These let you save and recall sets of
settings with single programming commands. For further details, refer
to "Handling Measurement Settings -
The :CONFigure:MEASurement:SETTing subtree" in the Programming
Guide.
Figure 34 Settings of the Optical Multiport Power Meter
Keysight N774x Series 45