Initial Inspection
N O T E
Safety Considerations
Safety Considerations - Overview
Keysight N774x Series
Inspect the shipping container for damage. If there is damage to the
container or cushioning, keep them until you have checked the contents
of the shipment for completeness and verified the instrument both
mechanically and electrically. The Function Tests give a procedure for
checking the operation of the instrument. If the contents are incomplete,
mechanical damage or defect is apparent, or if an instrument does not
pass the operator's checks, notify the nearest Keysight Technologies
Sales/Service Office.
To avoid hazardous electrical shock, do not perform electrical tests when there are
signs of shipping damage to any portion of the outer enclosure (covers, panels, and
so on).
The following generalsafety precautions must be observed during all
phases of operation, service, and repair of this instrument. Failure to
comply with these precautions or with specific warnings elsewhere in
this manual violates safety standards of design, manufacture, and
intended use of the instrument. Keysight Technologies Inc. assumes no
liability for the customer's failure to comply with these requirements.
This product has been designed and tested in accordance with IEC
Publication 61010-1, Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory, and has been supplied in a safe
condition. The instruction documentation contains information and
warnings that must be followed by the user to ensure safe operation and
to maintain the product in a safe condition.
1
Getting Started
9