Collecting Troubleshooting Information; Trouble Response; Executing Advanced Copy; Connection Type Settings - Fujitsu ETERNUS DX60 Operation Manual

4.3.2 Collecting Troubleshooting Information

There are other methods to analyze the effects of the trouble besides
required.
In addition, for hardware troubles, contact the hardware administrator when needed.
-
Trouble information collection
The trouble information can be collect using either the
Refer to "Collecting Troubleshooting Information" in the
-
Displaying operation history
The Web Console operation (contents, execution status and results) history can be displayed.
Refer to "Display Operation History" in the
-
Displaying login/logout history
The Web Console user login and logout history can be displayed.
Refer to "Display Login/Logout History" in the

4.3.3 Trouble Response

After identifying the trouble condition as shown in
Information", contact a system administrator or a hardware administrator, referring to the message and trouble information.
After resolving the trouble, reload the configuration information to update information. Refer to "Reload ETERNUS Disk Storage System
Configuration Information" in the

4.4 Executing Advanced Copy

This section describes the procedures for executing Advanced Copy.
Express can execute snapshot copy (SnapOPC+). The maximum number of copy sessions that can be executed with the device is as
follows:
ETERNUS DX60/DX60 S2/DX80/DX80 S2/DX90/DX90 S2
ETERNUS DX100 S3
ETERNUS DX200 S3
ETERNUS DX200F

4.4.1 Connection Type Settings

Set up the type of the connection with ETERNUS Disk storage system used by Copy command via SAN or Copy command via LAN.
See
Refer to "System Configuration" in the
Copy command via SAN and Copy command via LAN.
There are two connection types.
Connection Type
Access through volumes
Access through network
ETERNUS SF Web Console Guide for details.
ETERNUS SF Web Console Guide for details.
ETERNUS SF Web Console Guide for details on the operation procedures.
Device Name
ETERNUS SF AdvancedCopy Manager Operation Guide for Copy Control Module for details about
If this type is selected the copy command is issued through the SAN interface.
If this type of selected the copy command is issued though the LAN interface.
"4.3.1 Identifying Trouble
esfsnap command or Web Console.
ETERNUS SF Web Console Guide for using the Web Console.
"4.3.1 Identifying Trouble
Maximum Number of Copy Sessions
8
1024
2048
Explanation
- 25 -
Condition". Use those methods as
Condition" or "Collecting the Troubleshooting