Chapter 4 Operation; Resource Management; Operations For Eternus Disk Storage System; Operations Related To Server - Fujitsu ETERNUS DX60 Operation Manual

Chapter 4
This chapter describes the procedure to operate the disk storage system using Express.

4.1 Resource Management

Various functions can be used on the Web Console to the disk storage system registered into Express.
See
ETERNUS SF Web Console Guide for details on the operation procedures using the Web Console.
Refer to the

4.1.1 Operations for ETERNUS Disk Storage System

Express can execute operations related to ETERNUS Disk storage system.
Using the Web Console, select the disk storage system, and then select the process on the Action pane.
The executable operations are as follows.
-
Display ETERNUS Disk storage system
-
Delete ETERNUS Disk storage system
-
Change ETERNUS Disk storage system information
-
Set and change the information of the account that can access ETERNUS Disk storage system
-
Change the storage system name for ETERNUS Disk storage system
-
Change the Box ID for ETERNUS Disk storage system
-
Configure ETERNUS Disk storage system
-
Assign ETERNUS Disk storage system volumes to a server
-
Reload ETERNUS Disk storage system configuration information
Note
In the following cases, since the ETERNUS Disk storage system has been modified beyond management of Express manager, the
configuration information must be reloaded:
-
An error event or warning event has been received
-
The ETERNUS Disk storage system has recovered from a problem
-
Performance is managed and monitored status is not up-to-date
-
Management Server or Express manager has stopped its functions before operations specified from the Web Console are completed
-
When the ETERNUS Disk storage system is being managed by multiple Express managers
-
ETERNUS Disk storage system is operated by another manager (not Express)
-
If the ETERNUS Disk storage system was upgraded with new hardware option e.g. Unified Kit
-
The firmware of the ETERNUS storage system was updated

4.1.2 Operations Related to Server

Express can execute operations related to servers.
Using the Web Console, select the server, and then select the process on the Action pane.
Operation
- 13 -