Fujitsu ETERNUS DX60 Operation Manual page 116

outDirName
Specify the directory that outputs performance information.
Performance information is output to the
The following free space (unit: MB) is required for this directory.
(((0.1 + 0.4 * installed DEs + 0.1 * installed CM ports + 0.2 * (LUs + RAID groups)) * 1440)
+ (0.2 + 0.6 * installed DEs + 0.2 * installed CM ports + 0.4 * (LUs + RAID groups))) / 1024
OPTIONS
ipAddr
-ipaddr
This option specifies the IP address of the device that outputs performance information.
The output target device must satisfy the following conditions:
-
Storage devices output performance information must be registered in this software.
Refer to "Performance management" for the settings of performance monitoring.
-recent 24
This option collects the latest 24-hour performance data.
If this option is skipped, the latest 1-hour performance data is collected.
outDirName directory based on the following configuration.
- 102 -