Changing Express's Manager Environment (Linux); Changing Port Numbers (Linux) - Fujitsu ETERNUS DX60 Operation Manual

Copy the subdirectories and files from the destination directory.
cp -p $BAK_DIR/etc/opt/FJSVssmgr/current/sanma.conf /etc/opt/FJSVssmgr/current/
cp -Rp $BAK_DIR/etc/opt/FJSVssmgr/current/eventmail/* /etc/opt/FJSVssmgr/current/eventmail/
7.
Restore the polling service setting file.
This restoration is unnecessary for the files which have not been backed up.
Copy the file from the backup location.
# cp -p $BAK_DIR/etc/opt/FJSVssmgr/current/polling/*.xml /etc/opt/FJSVssmgr/current/polling/
8.
Restore the files associated with definition of copy group and copy pair.
This step is required only when using Advanced Copy function.
Delete files under the following restore destination directory.
rm -rf /etc/opt/FJSVccm/db/cg/*
rm -f /etc/opt/FJSVccm/prop/user.properties
rm -f /etc/opt/FJSVccm/accc/etc/stxc.alias
rm -f /etc/opt/FJSVccm/accc/etc/stxc_ext.alias
rm -f /etc/opt/FJSVccm/accc/etc/stxcvolinf
Copy the subdirectories and files from the destination directory.
It is unnecessary to restore the files which are not existed.
cp -p $BAK_DIR/CCM/etc/db/eternus.xml /etc/opt/FJSVccm/db
cp -p $BAK_DIR/CCM/var/micc/database/DeviceRegList.xml /var/opt/FJSVccm/micc/database
cp -p $BAK_DIR/CCM/etc/prop/user.properties /etc/opt/FJSVccm/prop
cp -p $BAK_DIR/CCM/etc/stxc.alias /etc/opt/FJSVccm/accc/etc
cp -p $BAK_DIR/CCM/etc/stxc_ext.alias /etc/opt/FJSVccm/accc/etc
cp -p $BAK_DIR/CCM/etc/stxcvolinf /etc/opt/FJSVccm/accc/etc
cp -Rp $BAK_DIR/CCM/etc/db/cg/* /etc/opt/FJSVccm/db/cg
9.
Restore the license management database.
Execute the following command. The
/opt/FJSVccm/bin/esflm restore $BAK_DIR/LM/<file_name>
10.
Execute the following shell script to start the ETERNUS SF Manager services.
/opt/FJSVccm/bin/startesf.sh

5.2.3 Changing Express's Manager Environment (Linux)

This section describes the following procedure.
-
How to change the port numbers used in Express or Web Console
-
How to change the IP address of the Management Server
5.2.3.1

Changing Port Numbers (Linux)

Changing Port Numbers Used in Express
This section describes how to change port number that is used by Express.
The port numbers are defined in the operating system's services file. The ports shown in the following table are used by Express. The
default values for the port numbers are shown. If you have changed the value for these port numbers, please read the numbers to
replace after the change in this section.
fileName is the file name specified when the backup data was created.
- 84 -