Fujitsu ETERNUS DX60 Operation Manual page 56

4.
When it discovers a virus/illegal program, it outputs a detection log to the log folder.
5.
When it discovers a virus/illegal program, the results of the detection are notified to the Web Console.
Point
-
The antivirus function only applies to shared folders using the CIFS protocol.
-
The NAS interface must be configured with the ETERNUS Disk storage system so that two CMs in the ETERNUS Disk storage system
can communicate to the antivirus server.
-
We recommend establishing multiple antivirus servers. If the ETERNUS Disk storage system cannot communicate with the antivirus
server, the client will not be able to access files in the NAS environment.
Refer to the ETERNUS Disk storage system manuals for the number of the antivirus server that can be registered in the ETERNUS
Disk storage system.
-
Prepare an antivirus server activation code for each ETERNUS Disk storage system.
-
The antivirus function is available for shared folders that have writing authority.
The shared folders that have no writing authority are not scanned.
If the antivirus server detects a virus it will deal with it automatically.
Please check the action taken by the antivirus server according to the following procedures:
1.
Access the shared folder and check the logs are output to the following folder.
\\nasInterfaceIpAddress\sharedFolderName\.evscan\log
The log file names are as follows:
-
Latest logs
viruslog_YYYY_MM.txt
YYYY : year, MM : month(1~12)
-
Past logs
viruslog_YYYY_MM_partN.txt
YYYY : year, MM : month(1~12), N : control No.(decimal starting from 1)
See
Refer to the message output to the log for details of the log. Refer to the ETERNUS Disk storage system manuals for the action.
2.
Check the action taken by the antivirus server from the content of the log.
If you want to check the detected content in detail, provide the log and relevant file to the vendor for confirmation.
Files quarantined by the antivirus server are in the following folder.
\\nasInterfaceIpAddress\sharedFolderName\.evscan\quarantine
Point
When the capacity of the log output destination is not sufficient, an SNMP Trap will be sent. When notified, perform the following to
secure capacity.
-
Extend the NAS volume.
-
Delete unnecessary past logs and files in the .evscan\quarantine folder.
- 42 -