Maintenance Of Express's Manager Environment (Linux); Backing Up Express's Manager Environment (Linux) - Fujitsu ETERNUS DX60 Operation Manual

Information
Notation in Procedure:
-
$INS_DIR: "Program Directory" specified at the ETERNUS SF Manager installation
Perform the following procedure to change the IP address of Management Server.
1.
Execute the following batch file on the Management Server to stop the ETERNUS SF Manager services.
$INS_DIR\Common\bin\Stop_ESFservice.bat
2.
Change the IP address of the Management Server.
3.
Execute the following batch file on the Management Server to start the ETERNUS SF Manager services.
$INS_DIR\Common\bin\Start_ESFservice.bat
4.
Create a server information change instruction file on the Management Server, then execute the stgxfwcmmodsrv command
with the -f option specified to change the IP addresses.
[Example] In the case that name of the server information change instruction file is "c:\acm\modfile".
$INS_DIR\ACM\bin\stgxfwcmmodsrv -f c:\acm\modfile
5.
If the IP address of the Management Server is specified for SNMP Trap destination, change the specified IP address using the
ETERNUS Web GUI.
Refer to the ETERNUS Web GUI manuals for more information.
6.
Restart the Management Server.
7.
Launch the Web Console and connect to Express's manager running on the Management Server whose IP address has been
changed.
See
Refer to "stgxfwcmmodsrv (Server Information Change Command)" in the
corresponding to the operating system of the Management Server for information on the stgxfwcmmodsrv command and the server
information change instruction file.

5.2 Maintenance of Express's Manager Environment (Linux)

5.2.1 Backing Up Express's Manager Environment (Linux)

It is required to back up the Express's manager environment to recover from failure on the Management Server.
Perform the following procedure to back up the Express's manager environment.
All operations are performed on the Management Server.
Information
Notation in Procedure:
Directory Name
$BAK_DIR
1.
Stop the ETERNUS SF Manager Web service.
Execute the following shell script to stop the service.
This is a backup destination directory.
ETERNUS SF AdvancedCopy Manager Operation Guide
Explanation
- 80 -