Fujitsu ETERNUS DX60 Operation Manual page 38

Figure 4.2 Web Console
If trouble is occurring, check the following item.
-
Dashboard
This is the initial screen when you login to the Web Console.
It is possible to check the status of components in the device to be managed and the state of event log immediately.
When trouble occurs, number of trouble-occurred devices or events is counted up in the field which "Error (
( )" icon is displayed.
If the value in the field is counted up, it is highly possible that business operations are affected. Therefore, identify the cause of
the trouble to determine how to correct it.
By clicking the value in the field, the management screen is displayed. It is possible to check the detailed status in the management
screen.
-
Event log
When trouble occurs in the disk storage system, the Management Server receives an event notification by SNMP Trap.
The notified event can be verified in the event log.
Refer to "Display Events" in the
Note
If an Error or Warning level event is reported, update the corresponding storage system element status manually.
When the status of the storage system is recovered, also update the corresponding storage system element status manually.
The global status of the system containing the element is updated automatically.
Refer to "Reload ETERNUS Disk Storage System Configuration Information" in the
operation procedures.
Point
In the following cases, the status icon is updated.
-
When there is a higher error event notification from the disk storage system.
-
When the configuration information is reloaded using the Web Console.
ETERNUS SF Web Console Guide for details on displaying the event log.
ETERNUS SF Web Console Guide for details on the
- 24 -
)" or "Warning