Esfsnap (Express's Manager Troubleshooting Information Collection Command) - Fujitsu ETERNUS DX60 Operation Manual

EXAMPLES
For Windows
Output of performance information for a device with IP address 10.12.13.14 to the c:\work directory:
> C:\ETERNUS_SF\ESC\Manager\opt\FJSVssmgr\sbin\storageadm perfdata export "C:\work" -ipaddr
10.12.13.14
For Linux
Output of performance information for a device with IP address 10.12.13.14 to the /tmp directory:
# /opt/FJSVssmgr/sbin/storageadm perfdata export /tmp -ipaddr 10.12.13.14
NOTES
The full path of an existing directory must be specified in
B.2 esfsnap (Express's Manager Troubleshooting Information
Collection Command)
NAME
esfsnap - Collects the troubleshooting information of the Express's manager
SYNOPSIS
For Windows
$INS_DIR\Common\bin\esfsnap -dir dirName [-all]
($INS_DIR means "Program Directory" specified at the ETERNUS SF Manager installation.)
For Linux
/opt/FJSVesfcm/bin/esfsnap -dir dirName [-all]
DESCRIPTION
This command collects the troubleshooting information of the Express's manager on the Management Server when a problem occurs.
Only user of OS administrative group can execute this command.
Please send the collected data to Fujitsu Technical Support.
OPTIONS
dirName
-dir
For Windows
Specify a directory where the troubleshooting data is stored. It is necessary to specify the full path name that begins with a
dirName .
drive letter for
The maximum length that can be specified for
The collected troubleshooting data are stored in the directory which its name begins with "esfsnap_". Before executing this
command, please check that
Collected Information
Initial investigation information
All troubleshooting information
outDirName .
dirName is 70 bytes.
dirName directory has the following free space.
More than 40MB
More than "80 + (2 * number of registered device)" MB
- 103 -
Required Free Space