Mmemory:data (?) - Tektronix AWG710 Programmer's Manual

Command Descriptions
Examples

MMEMory:DATA (?)

Group
Related Commands
Syntax
MMEMory
Arguments
Examples
2-56
<msus> (mass storage unit specifier)::=<string> is the media on which
the file exists:
MAIN
FLOPpy
NET1, NET2, or NET3
MMEMory:COPY "FILE1.WFM","MAIN","FILE2.WFM","FLOPpy"
copies the file FILE1.WFM on the waveform generator hard disk to the file
FILE2.WFM on the floppy disk.
This command loads block data into the file on the default mass storage device,
or returns the contents of the file.
Mass Memory
MMEMory:CDIRectory, MMEMory:MSIS
MMEMory:DATA <file_name>,<data>
MMEMory:DATA <file_name>?
:
DATA
<file_name>::=<string> specifies the file to be loaded with data.
<data> is in 488.2 block format.
MMEMory:DATA "FILE1",#41024xxxxx...
loads data into the file FILE1.
AWG710 Arbitrary Waveform Generator Programmer Manual
Internal hard disk drive
Internal floppy disk drive
Network drive 1, 2, or 3 (specified with
the SYSTem:COMMunicate:LAN commands)
<space> <file_name> , <data>
?