Opc (?); Opt? (Query Only) - Tektronix AWG710 Programmer's Manual

*OPC (?)

Group
Related Commands
Syntax
Arguments
Returns

*OPT? (Query Only)

Group
Syntax
Arguments
AWG710 Arbitrary Waveform Generator Programmer Manual
Operation complete command (query). Use this command between two other
commands to ensure completion of the first command before processing the
second command.
In this application, all commands are designed to be executed in the order in
which they are sent from the external controller. The *OPC (?) command is
included to ensure compliance with the SCPI standard. You do not need to use
this command.
Refer to page 3–6 about the OPC bit of SESR (Standard Event Status Register).
Synchronization
*WAI
*OPC
*OPC?
*OPC
?
None
<NR1>=1 when all pending operations are finished.
This command returns the implemented options of the waveform generator.
System
*OPT?
?
*OPT
None
Command Descriptions
2-63